Horizontal Fiber Optic Splice Closure

Fiber Optic Splice Closure

FOSC-H001



1. Scope of application
This Installation Manual is suit for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC),
as the guidance of proper installation.
The scope of application is: aerial, underground, wall-mounting, wall-mounting in duct and handhole.
The ambient temperature ranges from -40 to +65℃.

2. Basic structure and configuration
2.1 Dimension and capacity


Outside dimension (LxWxH)

390×210×120

Weight (excluding outside box)

1900g-2100g

Number of inlet/outlet ports

6 ports

Diameter of fiber cable

Φ7—Φ16(mm)

Capacity of FOSC

Bunchy: 6—96(Cores)
Ribbon: max. 144 (Cores)

2.2 Main components


No.

Name of components

Quantity

Usage

Remarks

1

Housing

1 set

Protecting fiber cable splices in whole

Internal diameter:
285x110 (mm)

2

Insert plate

2 pairs

Fixing the housing

175x56x30(mm)

3

Fiber optic splice tray
(FOST)

Max. 4 trays (bunchy)
Max. 4 trays (ribbon)

Fixing heat shrinkable protective sleeve and holding fibers

Suitable for: Bunchy: 6,8,12,16,24(cores) Ribbon: 3 (pieces)

4

Foundation

1 set

Fixing fiber cable, reinforced core and FOST

 

5

Seal fitting

1 set

Sealing between FOSC cover and FOSC bottom

 

6

Port plug

6 pieces

Sealing empty ports

 

7

Earthing deriving device

1 set

Deriving metallic parts of fiber cables in FOSC for earthing connection

Configuration as per requirement

           

 

2.3 Main accessories and special tools


No.

Name of accessories

Quantity

Usage

Remarks

1

Heat shrinkable protective sleeve

 

Protecting fiber splices

Configuration as per capacity

2

Nylon tie

 

Fixing fiber with protective coat

Configuration as per capacity

3

Insulation tape

1 roll

Enlarging diameter of fiber cable for easy fixing

 

4

Seal tape

1 roll

Enlarging diameter of fiber cable which fits in with seal fitting

Configuration as per specification

5

Hanging hook

1 set

For aerial use

 

6

Earthing wire

1 piece

Putting through between earthing devices

To put through as per actual requirement

7

Abrasive cloth

1 piece

Scratching fiber cable

 

8

Labeling paper

1 piece

Labeling fiber

 

9

Special wrench

3 pieces

Fixing bolts, tightening nut of reinforced core

 

10

Measuring paper

1 piece

To measure perimeter of fiber cable, of which the diameter is enlarged with seal tape

To measure perimeter with the corresponding measuring paper

11

Buffer tube

To be decided by customers

Hitched to fibers and fixed with FOST, managing buffer

Configuration as per requirement

12

Desiccant

1 bag

Put into FOSC before sealing for desiccating air.

 

 


Feedback: Fiber Optic Splice Closure

Send Inquiry by feedback form learn more about product detail, price, etc.
Your email address will not be published. Required fields are marked *